Savi Medical Engineers
call us at
+91-11-22474503
slide1
slide2
slide3
slide4
slide5

DENTAMATIC 500 Chameleon MX

Product Discription

DENTAMATIC 500 Chameleon MX is a fully automated vacuum furnace for drying and baking of ceramics with or without vacuum. This furnace is suitable for metal less working. Also the furnace is possible to be controlled from PC. As stand alone unit furnace can store up to 100 different programs. The furnace can be connected to Personal Computer (PC) where unlimited number of programs can be stored.
FEATURES
  • precise temperature control
  • platinum thermocouple
  • LCD display
  • automatic temperature calibration after each program start
  • programmable standby temperature
  • programmable drying and cooling
  • temperature speed up to 200°C/min
  • vacuum control by time, temperature and both
  • electronic vacuum level control
  • long life quartz protected heater
  • enameled steel chamber for better vacuum
  • temperature correction for each program from –25 to +25 ° C
  • 100 freely programs
  • program time up to 10 hours
  • fan cooling system with independent supply
  • diagnostics for easy troubleshooting
  • power failure and runaway protection
  • program protection against heater damage, in case of thermal sensor failure
  • suitable for metal free ceram and titanium
  • operation inC to ° F
  • vacuum level in Bar, cmHg or InHg
  • continuous step technology
  • PC Control
  • unlimited number of the admissible starts in 24 hours
  • very small work place only 225/225mm
  • thread thermal calibration (optional)
  • estimated life-expectancy of the muffle and the heater (quartz) - 10 years,
  • if the temperature used is up to1000°C
SPECIFICATIONS

Electrical:

  • Power Supply - AC 220V/50,60Hz or 110V/60Hz
  • Admissible variation of the supply voltage +10, – 5%
  • Maximum Power Consumption (without pump) - 1350W
  • Average power consumption in operation–approx. 300 W
  • Pump power consumption – max 270 W

Mechanical:

  • Overall dimensions 530mm/230mm/230mm;
  • Weight – approx. 11,5 - 14 kg;
  • Diameter of the working chamber 92 mm
  • Height of the working chamber – 80 mm

Operational:

  • Maximum temperature 1050°C (1150°C option );
  • Maximum rate of temperature increase 200°C/min ;
  • Controllable Stand By mode (Idle) 100-600°C
  • Operation in °C or °F ;
  • Electronic vacuum level control
  • Operation in Bar, cmHg or InHg;
  • Number of programs 100;
  • Can be connected to PC

Environmental :

  • Storage temperature : 1°C - 50°C;
  • Operation temperature : 10°C - 50°C
  • Relative humidity: up to 80%
  • Altitude up to 2000m
  • No need to run night program
  • Average life-expectancy of the muffle and the heater (quartz protected) – 10 years